User guide

Getting started8

left page (8) of C81 Philippe, SUG en, A31008-H3330-A1-1-7619 (30.03.2006, 17:55)

Template: X75, 140x105mm,Version 2.2; VAR Language: en; VAR issue date: 060119

Getting started

Your phone's display is covered with

a protective film. Remove this before

using the phone.

Inserting SIM card/

battery

The service provider supplies you

with a SIM card on which all the im-

portant data for your line is stored. If

the SIM card has been delivered in

credit-card size, snap the smaller

segment out and remove any rough

edges.

• Place the SIM card in front of the

slot with the contacts facing

downwards. Then push the

SIM card fully into the holder

using gentle pressure

1. Ensure

that the cut-off corner is in

the correct position.

• Insert the battery sideways into

the phone

2, then press it down-

wards

until it engages.

• To remove, press the retaining tab

on the side of the battery, then lift

the battery out.

In rare cases

static discharge

can cause

temporary

discolouration in

the display.

However, this will

disappear within

approx.

10 minutes.