User guide

©
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00594
31Calling
VAR Language: am; VAR issue date: 041001
left page (31) of CT66 Cingular am, A31008-H7840-A65-2-4A19 (05.10.2004, 14:54)
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter the number (always
with dialling code/inter-
national dialling code).
] A short press clears the
last digit, a long press
clears the entire phone
number.
A
Press the Call key.
The displayed phone
number is dialled.
End call
B
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
I
Regulate the volume
(only possible during
a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
I
Pick out the phone num-
ber from the list, then to
dial press the …
A
... key.
If the number is busy
If the called number is busy or can-
not be reached because of network
problems several options are avail-
able (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
Either
Auto. redial
§Auto Dial§ The phone number is di-
alled automatically up to
ten times at increasing
time intervals. End with:
B End key.