Operation Manual

62
3/12/02 k45dm-ger.fm K45 - Flipper, en, A31008-H5100-A1-3-7619
Setup
§Menu§
Î
Setup
Î
Device
Î
Select a function.
Status
Fact. settings
The phone is reset to the default val-
ues i.e. the factory settings (does not
apply to SIM card and network set-
tings):
*
# 9 9 9 9 #
A
Phone identity
The phone identity number (IMEI) is
displayed. This information can be
helpful for customer service.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
T9 input
T9 preferred
Activate intelligent text entry or
deactivate it.
Input language
Select language in which the mes-
sage is to be composed.
Battery care
(only if a NiMH battery is used)
This function allows the NiMH bat-
tery to be regenerated in the event
of reducing operating times
(eliminating memory effect).
To do this, connect the phone as for
charging (p. 7) and then call up this
function.
The battery is now fully discharged
and recharged. Depending on the
state of the battery, this can take up
to 5 hours.
No phone calls can be made during this
process. The clock setting is retained.
Quality declaration for battery
The capacity of your mobile phone battery
reduces each time you charge/discharge it.
Storing the battery at temperatures that are
too high or too low also causes a gradual
loss of capacity. This can cause the
operating times of your mobile phone to
reduce significantly per usage cycle.
The battery is, however, designed to be
charged and fully discharged within a
period of six months from when the mobile
phone was purchased. Following this six-
month period we recommend replacing
your battery if you experience a significant
drop in performance. Please purchase only
Siemens original batteries.