Operation Manual

59
3/12/02 k45dm-ger.fm K45 - Flipper, en, A31008-H5100-A1-3-7619
Audio
Melody manager-Menu
§Options§
Open menu.
Receive and save ring tones
A melody is transferred to the buffer
via SMS/WAP. When a melody has
been received an icon appears above
the left soft key. Press this key to
start the melody manager.
A loaded melody must be stored on
Individual 1
to
4
for later use:
§Options§
Open menu.
N
Scroll to
Save
.
§Select§
Drücken.
MN
Select memory location
Individual 1
to
4
.
§Save§
Store melody.
Play Play the ring tones currently
loaded.
Save Store ring tone under
Individual 1 to 4.
Send Send ring tone via SMS
(only Individual 1 to 4).
Load... Load ring tone from Individual 1
to 4.
Discard Delete ring tone from the buffer.
Delete Delete ring tone from
Individual 1 to 4.
If the melody was stored under Individual 1,
for example, it appears as melody 21 in the
selection list.
Ring tones are available at:
www.my-siemens.com/ringtones
Call screening
Only calls from numbers that are in
the Phonebook or in a predefined
group are signalled audibly or by the
trembler. Other calls are merely dis-
played.
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 41).
(
Displayed when
activated.
Silent alert
To avoid being disturbed by the ring-
er, you can activate the trembler in-
stead. It can also be activated in addi-
tion to the ringer (e.g. in noisy
environments). The trembler is deac-
tivated when the battery is being
charged.
Key tones
Set the acoustic key tone:
Click
or
Tone
or
Silent
Minute beep
During the call you hear a beep after
every minute as a reminder of the
time elapsed.
Info tones
Set service and alarm tones:
§Select§
On or Off.
Edit
On and Extended.
~