Specifications

2/53

Siemens FI 01 · 2015 US Edition

Temperature Measurement

Transmitters for rail mounting

SITRANS TW four-wire system, universal, HART

Connection diagram for power supply, input and outputs

Relay outputs

■

Dimensional drawings

Dimensions for control room mounting, rail mounting in mm (inches)

Connected terminals

Closed-circuit operation (relay opens when

error)

• Device switched off 10 and 11

• Device switched on and no error 9 and 11

• Device switched on and error 10 and 11

Open-circuit operation (relay closes when

error)

• Device switched off 10 and 11

• Device switched on and no error

10 and 11

• Device switched on and error

9 and 11

1 to 4 Signal input (see "sensor input connections" for possible

types of connection)

5, 6 Analog output (U or I output parameterizable using plug-in

jumpers)

7, 8 Connection with HART communication for local

parameterization

9 to 11 Output for sensor fault/limit monitor as relay contact

(see below for possible parameterization)

12 PE connection

13, 14 Power supply input (protected against reverse polarity)

Relay output HART

SensorLimit

monitor

HART/Power supply

connection

14 13 12 11 10 9 8 7 6 5 4 3 2 1

1 In devices with explosion protection

112.5 (4.43)

26.6

(1.04)

114 (4.5)

135 (5.3)

12 (0.47)

38 (1.5)