User guide

HWC_Pref.fm
A31003-W1010-A100-1-7619, July 2005
HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
7
About this Guide
Documentation feedback
1.4 Documentation feedback
If you have any problems using this document, please contact your next level of support:
● Siemens employees should contact the interactive Customer Engagement Team (i-CET).
● Customers should contact the Siemens Customer Support Center.
When you call, please have the following information ready. This will help us to identify the
document that you are referring to.
● Title: HiPath Wireless Controller, Access Points and Convergence Software V3.0: User
Guide
● Part Number: A31003-W1010-A100-1-7619
1.5 Protocols and standards
Appendix D, “Reference lists of standards” lists the protocols and standards supported by the
Controller, Access Points and Convergence Software. These lists include the Requests for
Comment (RFCs) of the Internet Engineering Task Force (IETF) and the 802.11 standards
developed by the Institute of Electrical and Electronics Engineers (IEEE).
1.6 Regulatory information
Below is regulatory information for the HiPath Wireless Controller and the Wireless APs.
1.6.1 Safety
Wireless AP (AP2610 and AP2620):
● IEC 60959-1
● EN 60950-1
● UL 60950-1
● CAN/CSA C22.2 No.60950-1-03
7
Warnings identify essential information. Ignoring a warning can lead to problems
with the application.
7
Changes or modifications made to the HiPath Wireless Controller or the Wireless
APs which are not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.