User guide

HWC_APStartup.fm
A31003-W1010-A100-1-7619, July 2005
HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
61
Wireless AP: startup
Dynamic Radio Frequency Management (DRM) software
Configure DRM software
1. Select the Wireless AP tab in any screen. Click on the DRM option. The DRM
Configuration screen appears.
2. The Enable DRM checkbox is on by default., enabling the software globally.
3. From the list of registered Wireless APs, select the Wireless AP you want to configure for
DRM by clicking its checkbox on.
The fields for DRM populate with default values, with DRM “on”.
4. In the Coverage field, select from the drop-down list:
● Std (Standard Coverage) adjusts the range to the client that is the most distant, as
indicated by its signal strength
● Shpd (Shaped Coverage) adjusts the range based on neighboring Wireless APs
5. To enable the Avoid WLAN feature, select on from the drop-down list.
6. To configure a range within which the transmit power can be adjusted dynamically, select
the Minimum and Maximum power levels from the drop-down list.
7. When the configuration choices are complete, click on the Apply to selected APs button.
8. To save these changes, click on the Save button.
9. To re-establish baseline settings, forcing the APs to go through the auto-channel selection
process, click on the Reset DRM button.