User guide

RADIUS Attributes
A31003-W1010-A100-1-7619, July 2005
198 HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
HWC_AppendixF.fm
RADIUS Accounting
F.2 RADIUS Accounting
F.2.1 Account-Start Packet
The following table lists the information elements (including VSAs) supported in a RADIUS
Start message, issued by Controller, Access Points and Convergence Software, with RADIUS
Accounting enabled:
F.2.2 Account-Stop/Interim Packet
The following table lists the information elements (including VSAs) supported in a RADIUS
Stop or Interim messages, issued by Controller, Access Points and Convergence Software,
with RADIUS Accounting enabled:
Attribute NO. RAD. Data Type Name
Acct-Session-Id 44 string mu_session_id
User-Name 1 string mu_user_id
Filter-Id 11 string Filter-Id (Accept-response)
Acct-Interim-Interval 85 integer (Accept-response/GUI input)
Session-Timeout 27 integer (Accept-response/GUI input)
Class 25 octets (Accept-response)
Login-LAT-Group 36 octets (Accept-response)
Acct-Status-Type 40 integer Start
Acct-Authentic 45 integer Radius/Local/Remote
Framed-IP-Address 8 ipaddr Mu_ip_address
Connect-Info 77 string 802.11 a[b][g]
NAS-port-type 61 integer 18/19
Called-Station-ID 30 string BP MAC
Calling-Station-ID 31 string mu_mac_address
Acct-Delay-Time 41 integer
BP-Serial VSA string Siemens-AP-Serial
BP-Name VSA string Siemens-AP-Name
VNS-Name VSA string Siemens-VNS-Name
SSID VSA string Siemens-SSID
Table F-2