User guide

HWC_Ongoing.fm
A31003-W1010-A100-1-7619, July 2005
HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
141
Ongoing operation
Wireless AP client management
The screen displays the steps to initiate a software upgrade.
3. Step 1: From the drop-down list, select the software version you wish to use for the
upgrade. (This list is maintained in the AP Software Maintenance screen.)
4. Step 2: In the list of the registered Wireless APs and the current software image on each
one, select a Wireless AP for software upgrade by clicking its checkbox on. Use the Select
All or Clear All buttons to modify your selections.
5. Step 3: Click on Apply AP image version button. The selected software image from Step 1
now appears in the Upgrade To column beside the selected Wireless AP.
6. Step 4: To save the software upgrade strategy so that you run it later, click on the Save for
later button, or,
To run the software upgrade immediately, click on the Upgrade Now button. This will force
the selected Wireless AP to reboot, and the new software version will be loaded during this
process. The “Always upgrade AP to default image” choice in the AP Software
Maintenance screen overrides Controlled Upgrade settings.
12.2 Wireless AP client management
There are times when you want to cut the connection with a particular wireless device, for
service reasons or to deal with a security issue. Using the Wireless AP Client Management
screen, you can view all the associated wireless devices, by MAC address, on a selected
Wireless AP. Then you can then:
● disassociate a selected wireless device from its Wireless AP.