Installation Instructions

Siemens Industry, Inc. DPD01161%
2
2. Mounting procedure
1
Make an opening in the cabinet door for the control keypad
according to the dimensions in Appendix 1.
Make also the holes in the cabinet door for the screws using
the dimensions in Appendix 1.
2
Place the control keypad base (1.) toward the opening so that the screw holes you made
in the cabinet door meet the bushings on the backside of the base. See figures below.
3
Fix the base on the cabinet door by tightening the screws
(3.).
Cab i net
door
Cabinet
door
Rear view
Leave one screw
stil l unfixed