Installation Instructions

Siemens Industry, Inc. DPD01159%
2
Mounting procedure
1
Attach the transparent cover B to
the keypad base using the two
screws provided.Tighten the
screws to max. 1 Nm (8.85 lbf-in).
2
If a connection cable for the key-
pad is needed detach the foam
rubber gasket from the cover and
punch out the cylinder-formed
piece of foam rubber in order to
open way for the cable.
The gasket can then be split into
two pieces.
3
Then attach the black cover A
with the two screws provided.
Tighten the screws to max. 1 Nm
(8.85 lbf-in).
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improve-
ments are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2013 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
1-847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them to
[e-mail].