Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Siemens Application Siemens Industry, Inc. • 43
24-hour support +1-800-877-7545 (Dial 2)
3
P3.5.2.29 AI5 custom. max -160.00 160.00 % 100.00 192 Custom range max setting
P3.5.2.30 AI5 signal inversion 0 1 0 198
0 = Normal
1 = Signal inverted
P3.5.2.31 AI6 signal selection
AnIN
Slot0.1
199
See P3.5.2.13. Programma-
ble
P3.5.2.32 AI6 signal filter time 0.00 300.00 s 1.0 200 See P3.5.2.14.
P3.5.2.33 AI6 signal range 0 1 0 201
0 = 0…10 V / 0…20 mA
1 = 2…10 V / 4…20 mA
P3.5.2.34 AI6 custom. min -160.00 160.00 % 0.00 202 See P3.5.2.16.
P3.5.2.35 AI6 custom. max -160.00 160.00 % 100.00 203 See P3.5.2.17.
P3.5.2.36 AI6 signal inversion 0 1 0 209 See P3.5.2.18.
Table 30: Analog input settings.
Code Parameter Min Max Unit Default ID Description