Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Siemens Application Siemens Industry, Inc. • 33
24-hour support +1-800-877-7545 (Dial 2)
3
3.5.1.2 Descriptions of signal sources:
3.5.2 Column explanations
Code = Location indication on the keypad; shows the operator the parameter
number.
Parameter = Name of parameter.
Min = Minimum value of parameter.
Max = Maximum value of parameter.
Unit = Unit of parameter value; given if available.
Default = Value preset by factory.
ID = ID number of the parameter.
Description = Short description of parameter values or its function.
Table 23. Descriptions of signal sources.
Source Function
Slot0 1 = Always FALSE, 2-9 = Always TRUE
SlotA Number corresponds to digital input in the slot.
SlotB Number corresponds to digital input in the slot.
SlotC Number corresponds to digital input in the slot.
SlotD Number corresponds to digital input in the slot.
SlotE Number corresponds to digital input in the slot.
TimeChan-
nel (tCh)
1 = Time Channel1,
2 = Time Channel2,
3 = Time Channel3