Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Siemens Industry, Inc. • 28 Siemens Application
24-hour support +1-800-877-7545 (Dial 2)
3.4.7 Fieldbus data monitoring
Table 20: Fieldbus data monitoring
Code Monitoring value Unit ID Description
V2.8.1 FB Control Word 874
Fieldbus control word used by application in bypass mode/
format. Depending on the fieldbus type or profile the data
can be modified before sent to application.
V2.8.2 FB speed reference 875
Speed reference scaled between minimum and maximum
frequency at the moment it was received by the application.
Minimum and maximum frequencies can changed after the
reference was received without affecting the reference.
V2.8.3 FB data in 1 876 Raw value of process data in 32-bit signed format
V2.8.4 FB data in 2 877 Raw value of process data in 32-bit signed format
V2.8.5 FB data in 3 878 Raw value of process data in 32-bit signed format
V2.8.6 FB data in 4 879 Raw value of process data in 32-bit signed format
V2.8.7 FB data in 5 880 Raw value of process data in 32-bit signed format
V2.8.8 FB data in 6 881 Raw value of process data in 32-bit signed format
V2.8.9 FB data in 7 882 Raw value of process data in 32-bit signed format
V2.8.10 FB data in 8 883 Raw value of process data in 32-bit signed format
V2.8.11 FB Status Word 864
Fieldbus status word sent by application in bypass mode/for-
mat. Depending on the FB type or profile the data can be
modified before sent to the FB.
V2.8.12 FB speed actual 865
Actual speed in %. 0 and 100% correspond to minimum and
maximum frequencies respectively. This is continuously
updated depending on the momentary min and max frequen-
cies and the output frequency.
V2.8.13 FB data out 1 866 Raw value of process data in 32-bit signed format
V2.8.14 FB data out 2 867 Raw value of process data in 32-bit signed format
V2.8.15 FB data out 3 868 Raw value of process data in 32-bit signed format
V2.8.16 FB data out 4 869 Raw value of process data in 32-bit signed format
V2.8.17 FB data out 5 870 Raw value of process data in 32-bit signed format
V2.8.18 FB data out 6 871 Raw value of process data in 32-bit signed format
V2.8.19 FB data out 7 872 Raw value of process data in 32-bit signed format
V2.8.20 FB data out 8 873 Raw value of process data in 32-bit signed format