Operating Instructions

Demonstration Configurations
7
Bypass Operation
25
Siemens Industry, Inc. 125-1007 Rev.BA
2014-08-14
Drive Mode - Hand
Hand mode overrides the automation system and runs the drive in Keypad mode.
 The User has full control to start/stop the motor, and change the speed reference
directly from the keypad.
 In Hand mode, the Bypass (M1) contactor is opened and the Output (M2) contactor
is closed.
1. At the drive keypad, press the
Hand/Auto
button
.
2.
Use the
Up
and/or
Down
Arrow
buttons to
highlight
Drive
, then press
OK
.
3.
Use the
Up
and/or
Down Arrow
buttons to
highlight
Hand
, then press
OK
.
4.
Use the
Up
and/or
Down Arrow
buttons to
highlight
Activate
, then press
OK
.
The unit is now operating in Hand mode. The following table outlines the buttons you
can use to control the drive.
Button Icon
Button Name
Description
Start Start the Drive.
Stop Stop the Drive.
Up and Down Arrows Set the desired frequency (changes are immediate).