Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Siemens Application Siemens Industry, Inc. • 21
24-hour support +1-800-877-7545 (Dial 2)
3
3. SIEMENS APPLICATION
The Siemens drive contains a preloaded application for instant use.
The parameters of this application are listed in Chapter 3.5 of this manual and explained in more detail
in Chapter 3.6.
3.1 Specific functions of the Siemens application
The Siemens BT300 application is an easy-to-use application for not only basic pump and fan applica-
tions where only one motor and one drive is needed, but also offers extensive possibilities for PID con-
trol.
Features
• Start-Up wizard for extremely fast setup for basic pump or fan applications..
• Mini-Wizards to ease the setup of applications..
• Hand/Auto button for easy change between (keypad) and auto control place. The auto control
place is selectable by parameter (I/O or Fieldbus).
• Control page for easy operation and monitoring of the most essential values.
• Run interlock input (Damper interlock). Drive will not start before this input is activated.
• Different preheat modes used to avoid condensation problems.
• Maximum output frequency 320 Hz.
• Real-time clock and timer functions available (battery required). Possible to program 3 time
channels to achieve different functions on the drive (e.g. Start/Stop and Preset
frequencies).
• External PID-controller available.
Can be used to control e.g. a valve using the drive’s I/O.
• Sleep mode function which automatically enables and disables drive running with user defined
levels to save energy.
• 2-zone PID-controller (2 different feedback signals; minimum and maximum control).
• Two setpoint sources for the PID-control. Selectable with digital input.
• PID setpoint boost function.
• Feedforward function to improve the response to the process changes.
• Process value supervision.
• Multi-Pump control.
• Pressure loss compensation for compensating pressure losses in the pipework e.g. when
sensor is incorrectly placed near the pump or fan.