Operating Instructions

3
Demonstration Panel Overview
General Description
10
Siemens Industry, Inc. 125-1007 Rev.BA
2014-08-14
The second expansion board installed is the BT300-OPT-B1-V (as shown in Figure 4)
which contains six bi-directional terminals; however, these have all been wired as
digital inputs in the demonstration unit. These are completely programmable in the
Demonstration Panel as the User requires.
Figure 4: OPT-B5-V I/O Board - Expansion Slot C.
The Demonstration Panel enclosure contains the following equipment:
Power Cord
 Software Interface Cable (BT300-CABLE)
 CD (containing all documentation listed in the Reference Documents section of this
manual)
 Printed copy of this manual
 Foam insert (used for shipping only)
The Demonstration Panel enclosure contains controls that include the following:
 Control terminals
 Step-up control transformer
 Contactors:
– Bypass (M1)
– Output (M2)
– Service Switch (M3)
 Overload (current) relay (simulated)
 Disconnect Switch
 Mode Switch
 Diagnostics board