Operating Instructions

7
Demonstration Configurations
Bypass Operation
24
Siemens Industry, Inc. 125-1007 Rev.BA
2014-08-14
Bypass Operation
Drive Mode - Auto
Auto mode is the default mode of operation.
 This mode is used when the drive will control the motor, and the drive is used with
an automation system.
 In Auto mode, the Bypass (M1) contactor is opened and the Output (M2) contactor
is closed.
1. At the drive keypad, press the
Hand/Auto
button
.
2.
Use the
Up
and/or
Down
Arrow
buttons to
highlight
Drive
, then press
OK .
3.
Use the
Up
and/or
Down Arrow
buttons to
highlight
Auto
, then press
OK
.
4.
Use the
Up
and/or
Down Arrow
buttons to
highlight
Activate
, then press
OK .
The unit is now operating in the Drive mode using I/O or Fieldbus control. The display
will return to the default display.