Operating Instructions

4
Key Procedures
Factory Reset Procedure
16
Siemens Industry, Inc. 125-1007 Rev.BA
2014-08-14
Key Procedures
The detailed procedures can be found in the BT300 Operator’s Manual (DPD01149) or
the BT300
Bypass Operator’s Manual (DPD01391). This document only covers a few
highlights.
Factory Reset Procedure
Navigate to: User Settings > Parameter Backup > Restore Factory Default > Activate.
Startup Wizard
This Wizard starts automatically after the unit is factory reset. If required to reactivate
the Wizard, navigate to:
Quick Setup > Startup Wizard > Activate.
Bypass Wizard
The Bypass Wizard helps you to easily commission the Bypass function and features.
This Wizard can be started directly from the Startup Wizard. If you must reactivate the
Wizard, navigate to:
Quick Setup > Bypass Wizard > Activate.
The Bypass I/Os are automatically configured based on the mode selected.
Communications Configuration
The BT300 Demonstration Panel has RS-485 and Ethernet connections available for
ease of use. The communications configuration is documented in the
Siemens BT300
HVAC Drive Protocol Installation and User’s Manual
(DPD01162).
Figure 9: Communications Port Locations.