Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Siemens BT300 - Startup Siemens Industry, Inc. • 3
24-hour support +1-800-877-7545 (Dial 2)
1. SIEMENS BT300 - STARTUP
1.1 Startup Wizard
In the Startup Wizard, you will be prompted for essential information needed by the drive so that it can
start controlling your process. In the Wizard, you will need the following keypad buttons:
Left/Right arrows. Use these to easily move between digits and decimals.
Up/Down arrows. Use these to move between options in menu and to change value.
OK button. Confirm selection with this button.
Back/Reset button. Pressing this button, you can return to the previous question in the
Wizard. If pressed at the first question, the Startup Wizard will be canceled.
Once you have connected power to your Siemens BT300 variable frequency drive, follow these instruc-
tions to easily set up your drive.
Push the OK button unless you want to set all parameter values manually.
1
Language selection Depends on language package
2
Daylight saving
*
* These questions appear if battery is installed.
Russia
US
EU
OFF
3
Time* hh:mm:ss
4
Day* dd.mm.
5
Year* yyyy
6
Run Startup Wizard? Yes
No
7
Choose your process Pump
Fan
8
Set value for Motor nominal speed
(according to nameplate)
Range: 24...19,200 rpm