Operating Instructions

3
Demonstration Panel Overview
Operation Overview
14
Siemens Industry, Inc. 125-1007 Rev.BA
2014-08-14
Standard I/O Default Value
Description
RO2 Fault
RO3 Ready
AO1 Output Frequency
* If option is enabled.
BT300-OPT-B5-V
Default Value
Description
RO1 Bypass (M1)
RO2 Output (M2)
RO3 Interlock (Command)
Contact closure is required on any digital input that is defined as a Remote Safety.
If a contact closure occurs on the digital input defined for Overload, all Drive
operations will cease and the motor will not run.
Figure 8: Bypass I/O Interface.