Operating Instructions

Siemens Application Siemens Industry, Inc. • 95
24-hour support [phone] (Dial 2)
3
3.7.1 Fault appears
When a fault appears and the drive stops, examine the cause of the fault, perform the actions advised
here and reset the fault as instructed below.
1. Press the Reset button on the keypad for one second or
2. By entering the Diagnostics Menu (M4), entering Reset faults (M4.2) and selecting Reset
faults parameter.
3.7.2 Fault history
In menu M4.3, Fault history, you find the maximum number of 40 occurred faults. On each fault in the
memory you will also find additional information, see below.
(5)

(12)

(6)

ID: M4
STOP READY I/O


(0)
(39)
ID: M4.1
STOP READY I/O

ID: M4.2
STOP READY I/O
BT9152
Main Menu
Monitor
Parameters
Diagnostics
Diagnostics
Active faults
Fault history
Reset faults
Reset faults
Reset faults
Help



(0)
(39)
ID: M4.1
STOP READY I/O



!

!
!
51
891384s
51
871061s
39
862537s
ID: M4.3.3
STOP READY I/O

!
ID: M4.3.3.2
39
380
7.12.2009
04:46:33
862537s
STOP READY I/O
BT9154
Diagnostics
Active faults
Reset faults
Fault history
Fault history
External Fault
Fault old
External Fault
Fault old
Device removed
Info old
Device removed
Code
ID
State Info old
Date
Time
Operating time
Source1
Source2
Source3