Manualshelf

Operating Instructions

ManualsBrandsSiemens ManualsVariable Speed DriveSiemens BT300 HVAC Drive, Application Manual
11121314151617181920
Table Of Contents
Siemens Industry, Inc. • 10 Keypad of the drive
24-hour support +1-800-877-7545 (Dial 2)
Figure 4. Changing control places.
Accessing the control page
The Control page is meant for easy operation and monitoring of the most essential values.
1. Anywhere in the menu structure, push the HAND/AUTO button.
2. Push the Arrow up or the Arrow down button to select Control page and confirm with
the OK button.
3. The control page displays.
If the keypad control place and the keypad reference are selected to be used, you can set the
Keypad reference after pressing the OK button. If other control places or reference values are
used, the display will show Frequency reference, which is not editable. The other values on the page
are Multi-monitoring values. You can choose which values display here for monitoring (for this pro-
cedure, see page 13).
Figure 5. Accessing the control page.
2.1.2.4 Copying parameters
The parameter copy function can be used to copy parameters from one drive to another.
The parameters are first saved to the keypad, then the keypad is detached and connected to another
drive. Finally the parameters are downloaded to the new drive restoring them from the keypad.
(21)
STOP READY Keypad
ID: M1
(12)
(6)
ID:
STOP Ready Keypad
ID:1805
?
ID:
STOP READY Keypad
ID:211
(21)
STOP READY I/O
ID: M1
(12)
(6)
BT11114
Main Menu
Parameters
Diagnostics
Monitor
Choose action
Hand/Auto
Control page
Change direction
Hand/Auto
Hand
Main Menu
Parameters
Diagnostics
Monitor
Auto
Hand
Auto