Operating Instructions

Siemens Industry, Inc. • 8 Keypad of the drive
24-hour support [phone] (Dial 2)
2.1 Siemens keypad with graphical display
The graphical keypad features an LCD display and 9 buttons.
2.1.1 Keypad display
The keypad display indicates the status of the motor and the drive and any irregularities in motor or drive
functions. On the display, the user sees information about
his present location in the menu structure and
the item displayed.
See the attached Keypad Navigation Map to get a comprehensive idea of the menu structure.
2.1.1.1 Main menu
The data on the control keypad are arranged in menus and sub-menus. Use the Up and Down arrows
to move between the menus. Enter the group/item by pressing the OK button and
return to the previous
level by pressing the Back/Reset button.
The Location field indicates your current location. The Status field gives information about the present
status of the drive. See Figure 2.
Figure 2. Main menu.
2.1.2 Using the graphical keypad
2.1.2.1 Editing values
Change value of a parameter following the procedure below:
3. Locate the parameter.
4. Enter the Edit mode.
5. Set new value with the arrow buttons up/down. You can also move from digit to digit with the arrow
buttons left/right if the value is numerical and change then the value with the arrow buttons up/
down.
6. Confirm change with OK button or ignore change by returning to previous level with Back/Reset
button.
BT9159
(17)
(12)
STOP READY I/O
ID: M1
(5)
Main Menu
Quick Setup
Parameters
Monitor
Status field
Dir e c tion
Status field
Press OK to enter
Number of items
in the group
Location field
(Parameter ID number and
current menu location)
Control Place:
PC/IO/KEYPAD/FIELDBUS
STOP/RUN
READY/NOT READY/FAULT
ALARM
Activated group/item: