Operating Instructions
Table Of Contents
- 1. Siemens BT300 - Startup
- 2. Keypad of the drive
- 3. Siemens Application
- 3.1 Specific functions of the Siemens application
- 3.2 Example of control connections
- 3.3 Application - Quick setup parameter group
- 3.4 Monitor group
- 3.5 Application parameter lists
- 3.5.1 Parameter programming
- 3.5.2 Column explanations
- 3.5.3 Group 3.1: Motor settings
- 3.5.4 Group 3.2: Start/Stop setup
- 3.5.5 Group 3.3: Control reference settings
- 3.5.6 Group 3.4: Ramp & Brakes Setup
- 3.5.7 Group 3.5: I/O Configuration
- 3.5.8 Group 3.6: Fieldbus Data Mapping
- 3.5.9 Group 3.7: Prohibited Frequencies
- 3.5.10 Group 3.8: Limit supervisions
- 3.5.11 Group 3.9: Protections
- 3.5.12 Group 3.10: Automatic reset
- 3.5.13 Group 3.11: Timer functions
- 3.5.14 Group 3.12: PID-controller 1
- 3.5.15 Group 3.13: PID-controller 2
- 3.5.16 Group 3.14: Multi-pump
- 3.5.17 Group 3.16: Fire mode
- 3.5.18 Group 3.17: Application settings
- 3.6 HVAC Application - Additional parameter information
- 3.7 Application - Fault tracing
Keypad of the drive Siemens Industry, Inc. • 7
24-hour support +1-800-877-7545 (Dial 2)
2
2. KEYPAD OF THE DRIVE
The control keypad with graphical interface is the interface between the Siemens BT300 variable fre-
quency drive and the user. With the control keypad it is possible to control the speed of a motor, to su-
pervise the state of the equipment and to set the variable frequency driver's parameters.
Figure 1. Keypad buttons.
Stop Button
Start Button
Move Cursor
Move Cursor
Scroll Menu Up
Increase Value
Scroll Menu Down
Decrease Value
Enter Active Level/Item
Confirm Selection
Move Backward in Menu
Exit Edit Mode
Reset Faults with long Press
Left
Right