User Manual

CM2N8884E / 10.1999 Siemens Building Technologies
4/6 Landis & Staefa Division
Depending on the type of room control, we differentiate between two different types of
couplings for communication between the VISONIK BPS and the room level:
•
Directly at the communication card COM2
•
By means of an interface at communication card COM1/V.24 (CFE)
The illustration below shows both variants:
BPS
NIDES.RX
MONOGYR
TEC
BATIGYR
DESIGO RX
PNB
8884Z04
FLN
BatiBUS
LON
COM1 / V.24COM2
M-bus
RWI
One each of the following room control systems can be integrated into the VISONIK
BPS via its own bus:
Control system Interpretation
MONOGYR Room control system with MONOGYR bus, directly on COM2
TEC/RWI Room control system TEC or AEROGYR ventilation controller RWI on
the Floor Level Network (FLN), directly on COM2
BATIGYR Room control system, via BatiBUS node PNB on COM1
DESIGO RX Room control system based on LON-bus/LonMark, via LON interface
NIDES.RX on COM1
Note:
COM1 and COM2 communication cards must be ordered separately.
As a rule, all main functions for local operation are available at the VISONIK BPS:
•
Displaying
•
Operating
•
Printing
The individual functionality depends on the respective system and the type of
integration. Refer to the specific function sheets for more detailed information.
Refer to the following documents for more information on communication with the room
control system:
Document no. Title
CM2N8301E Building Process Station, overview
CM2N8311E Communication cards COM1
CM2N8312E Communication cards COM2
CM2N8879E Communication with MONOGYR, function sheet (planned)
CM2N8899E Communication with TEC, function sheet (planned)
CM2N8878E Communication with BATIGYR, function sheet (planned)
CM2N8877E Communication with DESIGO RX, function sheet (planned)
Room level
Two different
couplings
Room control systems
Communication
functions
Additional information