User Manual

Siemens Building Technologies CM2N8882en / 02.2000
Landis & Staefa Division 7/8
The module point information processed in the VISONIK BPS can be transmitted to the
communication partners on various levels. The illustration below provides an overview of
these processes:
BPS
DCS
BLN (SDLC)
Automation level
Operation and display,
local
Telephony
8882Z07E
The following table contains the individual levels combined with the possible partners and
elements:
Level Elements/Partner
Local operation and
display
Operating and display elements at the BPS:
−
POPcards (Personal Operating Process Cards)
−
PC with VISOTOOL Editor (operator program or COLBAS)
−
Printer at TTY2 interface
Telephony (dial-up
communication)
Teleprinter, Tele-BPS, DCS, ECU, coupled third-party systems,
via modems
Automation level Building Level Network (SDLC ring) with:
−
Data and Communication Server DCS and respectively
connected peripheral devices (graphical operation Insight,
printer)
−
Other process stations (BPS, PRV1, EKL-X)
−
Integrated individual room systems (TEC, Monogyr)
−
Coupled third-party systems (CFE solutions)
In the VISONIK DCS, I/O module point information may trigger the following reactions
and functions:
−
Process reactions
−
Chain reactions
−
Maintenance reactions
−
Time reactions
−
Date reactions
−
Alarm and fault messages
−
Clear text messages and reports
−
Display of colour plant picture on Insight (picture reaction on faults)
−
Superposed switching and positioning commands, e.g. for optimisation tasks
−
I/O point event storage
−
Data processing
Refer to the following documents for more information on this topic:
Document No. Title
CM2N8301E BPS User’s Guide
CM2Z8567E VISONIK Point Types and Parameters (expert documentation)
Transfer of module
point information
Communication
partner, overview
Explanations
(
illustration
)
DCS as
communication
partner
Additional information