User Manual

CM2N8313en

05.10.2000

Siemens Building Technologies

Landis & Staefa Division

VISONIK

COM1 communication

cards

BPS1.C1/1E..

For basic units PRV2... / BPS1.ECU

Cards for the basic units PRV2... or BPS1.ECU, for communication as a NetBPS

from VISONIK DCS V20 or as a EcuBPS from VISONIK DCS V20.

Two versions with the following communication interfaces:

• Ethernet interface 10BaseT + V.24 on TTY1 (for NetBPS)

• Ethernet interface 10BaseT + V.24 on TTY1 + SDLC ring (for EcuBPS)

Use

Communication with Ethernet connection applies where the NetBPS or EcuBPS is used

as a:

• Process station on an Ethernet (NetBPS).

• Communication device of a remote SDLC ring with connection to the VISONIK Data

and Communication Server DCS via Ethernet (EcuBPS).

Functions

Depending on the device type and application, communication cards are used for the

following:

• Communication with the VISONIK Data and Communication Server on the Ethernet.

• Report output to a local printer via TTY1.

• Operation and configuration of the process station via TTY1.

• Data communication with the process stations on the SDLC ring (EcuBPS only).

• Integration of L&S room control or third-party systems via TTY1 (NetBPS only).

8313P01

PAGE 1
8 8313P01 313 VISONIK® COM1 communication cards BPS1.C1/1E.. For basic units PRV2... / BPS1.ECU Cards for the basic units PRV2... or BPS1.ECU, for communication as a NetBPS from VISONIK DCS V20 or as a EcuBPS from VISONIK DCS V20. Two versions with the following communication interfaces: • Ethernet interface 10BaseT + V.24 on TTY1 (for NetBPS) • Ethernet interface 10BaseT + V.
PAGE 2
Type summary Communication card for PRV2..., Ethernet connection 10BaseT + 1 V.24 connection on TTY1. BPS1.C1/1E Communication card for BPS1.ECU, 10BaseT Ethernet connection + 1 V.24 connection on TTY1 + 1 connection for the SDLC ring (requires terminal block PVX1.1C). BPS1.C1/1ES Equipment combinations Basic unit Program card PRV2... / BPS1.ECU PVA3... / BPS1.M/E2...
PAGE 3
Technical data General data Electromagnetic compatibility Immunity Emissions conformity Electromagnetic compatibility Further general data and environmental conditions Weight with terminal block, without packaging 89/336/EEC Same as for basic units PRV2... or BPS1.ECU; see data sheets N8305 or N8307 0.
PAGE 4
Internal diagrams BPS1.C1/1E X5 TTY1/V.24 8313G01 BPS1.C1/1E card RJ45 X2 BPS1.C1/1ES X5 TTY1/V.24 8313G02 BPS1.C1/1ES card X1 RJ45 X2 X1 PVX1.1C 1A 2B 3A 4B 5 SDLC-Ring Ethernet connection 11A PHONE 12B 13A SDLC-Ring Ethernet connection 10BaseT X2 V.24 on TTY1 X5 Internal plug connection to basic unit PRV2... or BPS1.ECU 14B 15 16 17 PHONE RJ45 plug, assigned as per AT&T256: 123 V.