User Manual

ManualsBrandsSiemens ManualsBuilding automationBPS communication Function sheet

CM2N8311E

05.10.2000

311

VISONIK

COM1 communication

cards

BPS1.C1/...

PVC1...

For basic units PRV2... / BPS1.ECU

Cards with terminal block for the basic units PRV2... or BPS1.ECU, for communi-

cation as a VISONIK BPS from DCS V12 or as an EcuBPS from DCS V18.

Three versions with the following communication interfaces:

• Building Level Network (SDLC ring)

• Building Level Network (SDLC) and V.24 on TTY1 and TTY2

• V.24 on TTY1 and TTY2

Use

The COM1 communication cards are used when the BPS or EcuBPS is used as fol-

lows:

• As a partner station on a Building Level Network (BLN) or as a ring master and

communication device in a separate SDLC ring

• When the BPS or EcuBPS communicates with peripheral devices (modem, printer)

• When the BPS or EcuBPS is to be used as a remote station or ring master via te-

lephony

Summary of content (6 pages)

PAGE 1
8 311 VISONIK® COM1 communication cards BPS1.C1/... PVC1... For basic units PRV2... / BPS1.ECU Cards with terminal block for the basic units PRV2... or BPS1.ECU, for communication as a VISONIK BPS from DCS V12 or as an EcuBPS from DCS V18. Three versions with the following communication interfaces: • Building Level Network (SDLC ring) • Building Level Network (SDLC) and V.24 on TTY1 and TTY2 • V.24 on TTY1 and TTY2 . . . . .
PAGE 2
Functions Depending on the device type and application, communication cards are used for: • Communication with the VISONIK Data and Communication Server (DCS) and the VISONIK partner stations via the BLN or via modem/telephony • Report printout to a connected printer Type summary Communication card with BLN connection (SDLC ring), Terminal block PVX1.1C PVC1.1S Communication card with BLN connection (SDLC ring), PVC1.1ST / BPS1.C1/1ST 2 V.
PAGE 3
Mechanical design Plug-in cards with connection tabs to the terminal block (except TYP PVC1.1T). The related terminal block is mechanically encoded to only allow for connection at the designated location (III) on the basic unit. X2 1 1 2 3 4 Hardware differences . . . 83 11 Z0 1 View of card PVC1.1ST/BPS1.
PAGE 4
Commissioning notes . . . A program card must be inserted in the VISONIK BPS or EcuBPS to commission and test communications. Technical data General data conformity In accordance with the European Union directives on electromagnetic compatibility Emissions Immunity 89/336/EEC EN 50 081-1 EN 50 082-2 Weight with terminal block, without packaging 0.25 kg Note The same environmental and general data as for the PRV2... or BPS1.ECU basic units apply. See "Technical data" in N8305 or N8307.
PAGE 5
Internal diagrams Card for BLN bus (SDLC) PVC1.1S X5 PVX1.1C 1A 2B 3A 4B 5 6 7 11A 12B 13A 14B 15 16 . . 17 8311G01 SDLC-Ring Card for BLN bus (SDLC) and V.24 on TTY1 and TTY2 PHONE SDLC-Ring PHONE PVC1.1ST / BPS1.C1/1ST X5 TTY1/V.24 TTY2/V.24 X2 . . . . . X3 PVX1.1C 1A 2B 3A 4B 5 6 7 11A 12B 13A 14B 15 16 17 8311G02 SDLC-Ring Card for V.24 on TTY1 and TTY2 PHONE SDLC-Ring PHONE . . . PVC1.1T X5 TTY1/V.24 X2 TTY2/V.24 X3 8311G03 PVX1.
PAGE 6
/6 Siemens Building Technologies Landis & Staefa Division  2000 Siemens Building Technologies Ltd. COM1 communication cards Subject to change CM2N8311E 05.10.