User Manual

2/4
Siemens Building Technologies Program cards CM2N8317E
Landis & Staefa Division 05.10.2000
Type summary
Program card with 512KB RAM PVA3.01/Vxx *)
Program card with 1024KB RAM PVA3.02/Vxx or BPS1.M/E2-Vxx *)
*) The version designation /Vxx is a part of the ASN number and must be indicated on ordering; for example
PVA3.01/V18 (/Vxx corresponds to the current version).
Equipment combinations
Basic unit BPS/NetBPS PRV2... Data sheet N8305
Basic unit EcuBPS BPS1.ECU Data sheet N8307
Technical design
The program cards contain the following functional units and the associated memory
blocks:
– Operating system for the BPS/NetBPS, or EcuBPS, saved in EPROMs at factory.
– The EEPROM for storing the manufacturing and configuration data.
– RAM blocks for storing the plant operating program, the operating dialog and the
message buffer.
– Interface for basic unit, in the form of a pin connection.
Mechanical design
Plug-in circuit board cards. Internal connection to BPS/NetBPS or EcuBPS
8317Z01
2
3
4
X1
1
IC8
IC9
IC13
IC14
1
1 Operating system memory:
4 EPROM blocks at 512 KB
2 Process data memory:
4SRAMblocksat128KBontypePVA3.01
2 SRAM blocks at 512 KB on type PVA3.02 or
type BPS1.M/E2
3 Memory for factory and configuration data:
EEPROM 128 bytes
4 Pin connection
for basic unit PRV... or BPS1...
.
.
.
.
.
.
.
.
.
.
.
.
View of the program
card