User Manual

ManualsBrandsSiemens ManualsBuilding automationBPS communication Function sheet

CM2N8317E

05.10.2000

Siemens Building Technologies

Landis & Staefa Division

VISONIK

Program cards

BPS1.M/...

PVA3...

For basic units PRV2... / BPS1.ECU

Program cards for basic units PRV2... or BPS1.ECU The basic units for

BPS/NetBPS from VISONIK DCS V12/V20 or for EcuBPS from VISONIK DCS V18

are combined with these cards. Available in three models:

• PVA3.01/Vxx with 140 KB memory for applications

• PVA3.02/Vxx with 640 KB memory for applications

• BPS1.M/E2-Vxx with 640 KB memory for applications—for EcuBPS only

Use

The PVA3... or BPS1.M/... program cards are inserted in the basic units PRV2... or

BPS1.ECU, thereby converting these units into a VISONIK BPS/NetBPS or an EcuBPS

Functions

The program cards contain the following functions and data:

• Operating system; newest version integrated at factory (/Vxx)

• Plant operating program, project-specific (VISONIK BPS/NetBPS)

Summary of content (4 pages)

PAGE 1
317 8 VISONIK® BPS1.M/... PVA3... Program cards For basic units PRV2... / BPS1.ECU • BPS1.M/E2-Vxx with 640 KB memory for applications—for EcuBPS only . . . . . . . The PVA3... or BPS1.M/... program cards are inserted in the basic units PRV2... or BPS1.ECU, thereby converting these units into a VISONIK BPS/NetBPS or an EcuBPS . . Program cards for basic units PRV2... or BPS1.ECU The basic units for BPS/NetBPS from VISONIK DCS V12/V20 or for EcuBPS from VISONIK DCS V18 are combined with these cards.
PAGE 2
Type summary Program card with 512KB RAM Program card with 1024KB RAM PVA3.01/Vxx *) PVA3.02/Vxx or BPS1.M/E2-Vxx *) . . *) The version designation /Vxx is a part of the ASN number and must be indicated on ordering; for example PVA3.01/V18 (/Vxx corresponds to the current version). Equipment combinations Basic unit BPS/NetBPS Basic unit EcuBPS PRV2... BPS1.ECU Data sheet N8305 Data sheet N8307 . .
PAGE 3
Engineering notes STOP Note the following during engineering: • Use these cards only for applications as described in the brief description on the title page (bold print) and the section "Use". • Create the plant operating program in accordance with the control and supervisory requirements of the respective plant and by including all safety-related issues. Program card selection The PVA3.01/Vxx program card is used in the VISONIK BPS/NetBPS. − For standard DDC applications. − For plants with max.
PAGE 4
/4 Siemens Building Technologies Landis & Staefa Division ã 2000 Siemens Building Technologies Ltd. Program cards Subject to change CM2N8317E 05.10.