User Manual

Engineering notes
STOP
Note the following during engineering:
• Use these cards only for applications as described in the brief description on the title
page (bold print) and in section "Use".
• Create the plant operating program in accordance with the control and monitoring
requirements of the respective plant and by including all safety-related issues.
Mounting notes
The program card comes with mounting instructions. These instructions show where
and how to insert the card in the basic unit.
.
Do not touch electrical contacts or components on the open unit or card, as electro-
static discharges may destroy sensitive components.
When mounting, apply suitable safety measures such as using an earthed antistatic
mat connected to your wrist.
Commissioning notes
.
Insert a program card to commission the VISONIK BPS/NetBPS or EcuBPS.
Technical data
The following list contains the primary technical data for the program cards.
Memory for applications: conformity
BPS1.M/E2-Vxx 640KB (SRAM) In accordance with the European Union directives on
electromagnetic compatibility 89/336/EEC
System software: Emissions EN 50 081-1
All types 2 MB (EPROM) Immunity EN 50 082-2
Weight without packaging 0.11 kg
Note
The environmental conditions and all further general data of the basic units equally
apply; see data sheets N8306 or N8307.
.
3/4
Siemens Building Technologies Program card CM2N8318en
Building Automation 28-Jan-2004