User Manual

318

VISONIK

Program card

BPS1.M/...

For basic units BPS1... / BPS1.ECU

Program card for basic units BPS1... or BPS1.ECU. The basic units for

BPS/NetBPS from VISONIK DCS V12/V20 or for EcuBPS from VISONIK DCS V18

are combined with this card:

• BPS1.M/E2-Vxx with 640 KB memory for applications.

Use

The BPS1.M/... program card is inserted in the basic units BPS1… or BPS1.ECU,

thereby converting these units into a VISONIK BPS/NetBPS or an EcuBPS.

Functions

The program card contains the following functions and data:

• Operating system; newest version integrated at factory (-Vxx)

• Plant operating programs, project-specific (VISONIK BPS/NetBPS)

CM2N8318en

28-Jan-2004

Siemens Building Technologies

Building Automation

PAGE 1
8 318 VISONIK® BPS1.M/... Program card For basic units BPS1... / BPS1.ECU Program card for basic units BPS1... or BPS1.ECU. The basic units for BPS/NetBPS from VISONIK DCS V12/V20 or for EcuBPS from VISONIK DCS V18 are combined with this card: • BPS1.M/E2-Vxx with 640 KB memory for applications. Use The BPS1.M/... program card is inserted in the basic units BPS1… or BPS1.ECU, thereby converting these units into a VISONIK BPS/NetBPS or an EcuBPS. . .
PAGE 2
Type summary Program card with 1024KB RAM BPS1.M/E2-Vxx *) Version designation -Vxx is a part of the ASN number and must be indicated on ordering; for example BPS1.M/E2-v18 (-Vxx corresponds to the current version). . . . . Equipment combinations Data sheet N8306 Data sheet N8307 . The program card contains the following functional units and the associated memory blocks: – Operating system for the BPS/NetBPS, or EcuBPS, saved in EPROMs at factory.
PAGE 3
Engineering notes STOP Note the following during engineering: • Use these cards only for applications as described in the brief description on the title page (bold print) and in section "Use". • Create the plant operating program in accordance with the control and monitoring requirements of the respective plant and by including all safety-related issues. Mounting notes . The program card comes with mounting instructions. These instructions show where and how to insert the card in the basic unit.
PAGE 4
/4  2000 Siemens Building Technologies Ltd.