User's Manual

Technical specifications
8.4 Inputs
M200D AS-Interface Basic
92 Manual, 03/2009, A5E01668085-01
8.4 Inputs
Input characteristic to IEC60947-1 Appendix S Type 1
Input voltage - Rated value
- for signal "0"
- for signal "1"
24 V DC
-3 ... +5 V
11 ... 30 V
Input current for signal "1" 7 mA, typ.
Connection of 2-wire BEROs Possible
Permissible residual current 1.5 mA, max.
Input signal delay 10 ms fixed setting
Supply from U
AS-i
Short circuit and overload proof
Sensor supply 16.5 to 30 V DC
Summation current sensor supply Max. 200 mA (sensor supply is short-circuit proof)
Connection M12 connectors
Assignment of inputs
IN1
IN2
IN3
IN4
Input 1 (PII DI2)
Input 2 (PII DI3)
Input 3
Input 4
8.5 Output
Number of digital outputs 1
Switching capacity 0.5 A continuous current
Cable length Shielded
Unshielded
30 m, max.
Short-circuit protection
Response threshold
Electronic
> 0.7 A, typ.
Limiting of inductive shutdown voltage Integrated free-wheeling diode
Lamp load 5 W, max.
Sets an AS-i digital input Not permissible
Voltage drop For signal 1 U
AUX
+ (- 0.8 V), min.
Residual current For signal 0 0.5 mA max.
Assignment of output
OUT1 Output 1