User's Manual

Configuration / parameterization
5.3 Parameterization
M200D AS-Interface Basic
Manual, 03/2009, A5E01668085-01
73
Setting the device parameters on the DIP switch
Diagram Switch Function Setting
1 Temperature sensor 0: deactivated
1: activated
2 Temperature sensor 0: PTC type A
1: Thermoclick
3 Line-side connector
monitoring
0: deactivated
1: activated

4 Shutdown response of
thermal motor protection
0: with restart (= autoreset)
1: no restart

ჷ
'HOLYHU\FRQGLWLRQ
Figure 5-2 DIP switch labeling