User's Manual

Configuration / parameterization
5.3 Parameterization
M200D AS-Interface Basic
Manual, 03/2009, A5E01668085-01
71
5.3 Parameterization
5.3.1 Parameterization
The motor starter can be parameterized in the following ways:
● Rotary coding switch for:
– Setting the rated operating current I
e
– Deactivating the thermal motor model (class OFF)
● DIP switch
– To (de)activate the temperature sensor
– To set the temperature sensor type
– To (de)activate connector monitoring
– To set the shutdown response of thermal motor protection