User's Manual

Installation / connection
4.2 Connection
M200D AS-Interface Basic
62 Manual, 03/2009, A5E01668085-01
4.2.6 Digital inputs/outputs
Socket assignment
The digital inputs and output are available with standard 5-pin M12 sockets:
Assignment Pin Input Output
1 + 24 V (PWR+) N/C
2 N/C N/C
3 0 V (PWR-) 0 V (PWR AUX-)
4 DIx OUT1





5 FE FE
NOTICE
Potential transfer
With AS-i, digital inputs must not be connected to digital outputs because this can establish
an impermissible connection between the U
AS-i
and U
AUX
voltages.
4.2.6.1 Digital inputs
The motor starters are equipped with four digital inputs, which you can connect directly to
sensors (PNP) (2 and 3-wire system).
Connectors (M12, 5 pin) are used for this purpose. The motor starter is equipped with a
range of sockets.
NOTICE
Short-circuit hazard
Do not use an external power supply since this can result in a short-circuit.