User's Manual

Installation / connection
4.2 Connection
M200D AS-Interface Basic
60 Manual, 03/2009, A5E01668085-01
Brake variants
400 V AC 230 V AC 180 V DC
b9$&
/
/


;
b9$&
/
;
1


9'&
/
/
;


4.2.5 Brake output
M200D motor starters can be equipped with an optional electronic brake control (order
variant). The brake control is suitable for externally-suppled brakes with the coil voltages
shown below:
● 400 V AC / 230 V
The brake rectifier must be installed in the motor. The rectifier input is controlled via the
motor starter.
● 180 V DC
A rectifier is not required for the brake in the motor because the 180 V DC is provided by
the motor starter. In this way, brake coils for 180 V DC can be switched directly.