Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 48 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
4.2 Rack Assembly, LSLS and HPU
4.2.1 Rack Mounting Position
The ST950ELV Outercase is configured with a 19 inch swing frame, to which the ST950ELV
Rack Assembly is mounted. The Rack Assembly will be positioned in the Swing Frame as
shown in Figure 32. Information on exact positioning of the ST950ELV Rack Assembly
should be sought from manufacturing drawing detailed in the related document section of
this handbook. The whole ST950ELV Rack Assembly should not be ordered separately as it
is included in the Outercase, ordered from Table 4, however, some components in the Rack
Assembly do not come as standard and should be ordered to suit individual configurations.
Components mounted within the ST950ELV Rack Assembly are shown in Figure 32
Figure 32 – ST950ELV