Specifications

Mobility and Logistics, Traffic Solutions

Sopers Lane, Poole, Dorset, BH17 7ER

Security classification Unrestricted Page 47 of 83

Version 2 Status Released

Last Editor Harry Smyth Date 09/12/2014

Document Name Configuration Control Document No. 667/CC/45950/000

4 ST950ELV HARDWARE ALLOCATION AND CONNECTIVITY

4.1 ST950ELV Outercase Selection

With reference to Table 4 the ST950ELV can be specified as two base options; the

ST950ELV with 20A load capability or the ST950ELV with 40A capability. Please refer to the

ST950ELV General Handbook, detailed in the Related Documentation section, for full

specifications. With knowledge of the potential load requirement and with reference to

paragraph 4.2 the basic functional cabinet can be selected from Table 4. The Outercases

listed in Table 4 are equipped, at order time for onward configuration, with the following

major items;

 Appropriate number of HPU PCBs.

 LPU

 Appropriate number of Mains Transformers.

 Master Switch Assembly

 Back Panel

 LSLS Backplane Kits and associated LSLS cards

The basic functional units for the controller are contained within the ST950ELV Controller 6U

Rack Assembly. This unit can be ordered as a standalone (Cuckoo) unit and fitted to a

controller cabinet. More often the unit will be ordered as part of a fully functioning controller.

Please note, the involved relationship between choice of Outercase, number HPU Cards and

number of LSLS cards is explained below.

Table 4 – ST950ELV Outercase Selection

Part Number Description

667/1/45950/020

ST950ELV Cabinet UK 20A Single LSLS - Grey

667/1/45950/040

ST950ELV Cabinet UK 40A Single LSLS - Grey

667/1/45950/021

ST950ELV Cabinet UK 20A Single LSLS - Black

667/1/45950/041

ST950ELV Cabinet UK 40A Single LSLS - Black

667/1/45950/520

ST950ELV 20A Single LSLS Low Inrush -Grey

667/1/45950/521

ST950ELV 20A Single LSLS Low Inrush -Black