Installation guide

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 29 of 84
Version 1 Status Issued
Last Editor Carl Rabe Date 11-Dec-2014
Document Name Stratos Outstation General and ICM Handbook Document No. 667/HB/52250/000
Copyright © Siemens plc 2014. All Rights Reserved. Mobility and Logistics is a division of Siemens Plc
8+2 I/O
Status LEDs
Battery Isolation
switch
7
1
Figure 8 – PSU Board Front/Rear Connections
Description Connector
1 GSPI Bus – See
Figure 8.
Note. The PSU board, when connected in a
Stratos Outstation provides power on the
GSPI Bus. When in battery backed mode,
the power is cut to the downstream
peripherals (“OUT” side). See section 4.2 for
more information.
Double RJ45
2 LV/ELV Lamp Supply Monitor Input
See Table 12 for pinout
2 way 5.08mm pitch Phoenix
See Appendix B for part No.
3 General functions
See Table 13 for pinout
10 way 3.5mm pitch Phoenix
See Appendix B for part No.
4 AC Mains input to board Pre-wired – not for user
5 24V input from AC/DC PSU Pre-wired – not for user
6 Internal battery backup
(for lead acid battery)
2 pin JST header
7 TR2323 I/O Connector (8 inputs + 2 outputs)
See Table 11 for pinout
15 way 3.5mm pitch Phoenix
Table 8 – PSU Board Connector Functions and Types