Installation guide

Mobility and Logistics, Traffic Solutions

Sopers Lane, Poole, Dorset, BH17 7ER

Security classification Unrestricted Page 24 of 84

Version 1 Status Issued

Last Editor Carl Rabe Date 11-Dec-2014

Document Name Stratos Outstation General and ICM Handbook Document No. 667/HB/52250/000

Description Connector

1 2 x GSPI Bus master to GSPI Peripherals Double RJ45

2 Modem Power

See Table 6 for pinout

4 way 3.81mm pitch Phoenix

3 2 x USB Host Ports (rear) Double USB Type A

4 2 x 10/100 Ethernet Ports

port is closest to PCB)

Double RJ45

5 RS232 Port – TR2523 16 way IDC boxed header

6 RS232 Port – Modem, GPS etc 10 way IDC boxed header

7 USB Handset Port USB Type B

8 2 x USB Host Ports (front) Double USB Type A

Table 5 – CPU Board Connector Functions and Types

Pin Function

+24V DC input – Power for CPU board

when no PSU board is used

2 0V

Switched 24V (Nominal) Modem supply

output *

4 Optional RTC supply input (3V to 28V DC)

Table 6 – 4 Way 3.81mm pitch – Modem power and DC Power

* Note that the modem supply will follow the battery backup supply during a

mains failure. This output can range from 8 – 28V DC

For more information on supported communications devices and connection,

please refer to the IP Router Installation Guide 667/CI/45025/000.