Installation guide

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 18 of 84
Version 1 Status Issued
Last Editor Carl Rabe Date 11-Dec-2014
Document Name Stratos Outstation General and ICM Handbook Document No. 667/HB/52250/000
Copyright © Siemens plc 2014. All Rights Reserved. Mobility and Logistics is a division of Siemens Plc
A command line text interface is also available (e.g. for use with remote terminals or
handset connection) along with a simple text based menu system to allow straightforward
maintenance without the need for knowledge of handset commands or use of a PC.
The User Interface is described in detail in the User Interface Handbook
667/HU/46000/000.
3.9 Fault Table
The Fault Table shows faults and notifications that are currently active.
A fault is an abnormal condition which requires corrective action to be taken.
A notification provides information to the user but does not necessarily require any
immediate action.
Many faults will be automatically removed from the Fault Table when the condition which
caused the fault is removed. Some faults are latched and require manual clearing. A
button is displayed next to this latter type of fault which can be used to clear the fault. To
clear the fault, press the button and follow the instructions.
For more information see the User Interface Handbook 667/HU/46000/000.
3.10 System Log
Important events are recorded in the System Log. The source of the event with the date
and time at which the event occurred is recorded along with an indication of its severity:
 Error
 Notice
 Warning
 Information
With the default logging level configuration, only events with severity level of “Notice” and
“Error” are recorded in the System Log. The logging level can be configured separately for
each software function.
For more information see the User Interface Handbook 667/HU/46000/000.
3.11 Site Log
The Site Log records significant site events. System firmware update is automatically
recorded in the site log. It is also possible for the user to create text records, either with or
without a file attachment.
Attachments can be useful to record site details through diagrams, photographs,
documents, etc.
For more information see the User Interface Handbook 667/HU/46000/000.
3.12 Remote Reboot
Remote reboot allows the Stratos Outstation to be rebooted. This function is available on
the System web page.