Installation guide

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 13 of 84
Version 1 Status Issued
Last Editor Carl Rabe Date 11-Dec-2014
Document Name Stratos Outstation General and ICM Handbook Document No. 667/HB/52250/000
Copyright © Siemens plc 2014. All Rights Reserved. Mobility and Logistics is a division of Siemens Plc
2.3 Product Overview
The Stratos Outstation provides control and monitoring of traffic controllers and other on-
street equipment. The outstation provides an Ethernet port for IP connectivity to an
instation.
The controller interface can be either semi-integral, where the data is transferred via
RS232, or freestanding, where the interface is via individual I/O relay contacts. The
interface summary for each controller type is given in the following table:-
Supplier
Controller
RS232
Protocol *
Interface
type
Siemens ST950 ESP
#
Semi-
integral
ST800 ESP
#
ST900 ESP
#
ST750 ESP
#
ST700 ESP
#
T400 ASCII-7bit Free
Standing
T500 ASCII-7bit
Microsense /
Telent
MPC ASCII-7bit
MTC ASCII-7bit
Sentinel ASCII-7bit
Optima ASCII-7bit
Peek TSC3 ASCII-7bit
TRX ASCII-7bit
PTC-1 ASCII-7bit
TSP ASCII-7bit
Motus TM150 ASCII-7bit
TM150 2P ASCII-7bit
* See section 5.6 for cables and baud rates.
#
ESP = Enhanced Serial Port, binary message protocol
Table 1 – Outstation / Controller Interface Summary Table
The semi-integral and freestanding interfaces are described in the sections below.