Specifications

Siemens Mobility, Traffic Solutions

Sopers Lane, Poole, Dorset

BH17 7ER

Version 10 Page 83 of 120 Status Issued

Last Editor harry.smyth Date 03 November 2014

Document

Name

GENERAL HANDBOOK FOR HEIMDALL

DETECTORS

Doc. No.

667/HB/31900/000

7.2.2 Site Connection

Once a site file has been successfully opened it is possible to connect to the equipment

by selecting Site  Connect from the menu. For wireless connections this can take a

number of seconds especially if the Bluetooth is switched off, and also depending on

the current environmental conditions. It is recommended to start at a close distance for

the first connection to ensure range is not an issue. Generally once the connection is

established the range can be increased to a point beyond that at which an initial

connection could be achieved.

If the correct EDF has been installed, a successful wireless connection will be indicated

by ‘SIEMENS’ together with a ‘>’ being displayed.

If repeated connections fail, then a SOFT reset of the Pocket PC may be required.

7.2.3 Site Disconnection

Once the equipment connection is no longer required, select Site  Disconnect to

close down the connection to the equipment.