Specifications

Siemens Mobility, Traffic Solutions

Sopers Lane, Poole, Dorset

BH17 7ER

Version 10 Page 64 of 120 Status Issued

Last Editor harry.smyth Date 03 November 2014

Document

Name

GENERAL HANDBOOK FOR HEIMDALL

DETECTORS

Doc. No.

667/HB/31900/000

5.6.4.5 Detector Range – default

The detector uses a movement detection algorithm. Thus, the detector is aimed towards

oncoming pedestrians, at the right of the centre line of the on crossing area and towards

the far side of the carriageway.

If user requires increased detection sensitivity of pedestrians moving away from the

detector, the detector configuration may be adjusted using DIP switch 6 (reference Table

5-24 below). Alternatively the terminal command SEN could be used (reference section

7.7.4).

Figure 24 – Pedestrian On Crossing Detector Installation – Plan View