User Manual

Siemens Building Technologies CA1N5322E / 11.1998
Landis & Staefa Division 1/4
5
322
Digital temperature indicator BA-N1000
for L&S Ni1000 sensors
Single point digital temperature indicator


suitable for front-mounting on control panels


with 1 input for L&S Ni1000 sensor elements


with measuring range of – 50 ...150 °C


with liquid crystal display (LCD), 10 mm high, 3½ digits


for nominal voltage AC 24 V, 50/60 Hz
The BA-N1000 digital temperature indicator is suitable for frontal mounting in control
panels, control panel doors or covers. It is normally used to indicate temperature but
operation as a stand-alone thermometer is also possible.
The temperature, measured by an external L&S Ni1000 temperature sensor, is
displayed digitally. The supply voltage and input signal for the indicator are electrically
isolated by a built-in isolating transformer.
The temperature display can be calibrated with a
trimmer potentiometer.
Trimmer potentiometer
60256
+
2.5 K
–
When placing an order, please specify the quantity, product description and type code.
Example:
1 Digital temperature indicator
type
BA-N1000
The digital temperature indicator is compatible with all controllers of the ranges
DESIGO RX (controller QAX20), CLASSIC (Ni1000 units), DESIGO 30 (Ni1000 units)
and INTEGRAL RS (Ni1000 modules).
The indicator may also be used as a (stand-alone) thermometer.
The BA-N1000 consists of a single-part plastic housing incorporating front cover and
electronic printed circuit board with LCD digital display.
Use
Functions
Ordering
Compatibility
Mechanical design