Operating instructions

e1955
11.1999
5
Siemens Building Technologies
Cerberus Division
Operating access
General:
The control console is protected by a front door against unauthorized or unintentional manipulation. So no fur-
ther password protection is necessary except for some special functions which are restricted to the service engi-
neer.
Possible access levels:
Access level 1 Everybody  access to all user functions
Access level 3 Service  full privileges (service engineer only)
How to get USER operating access:
Just open the front door. Immediate access to all user functions is possible.
Ü See ’Overview operating menus’ on pages 36 up to 41
How to get SERVICE ENGINEER operating access:
Log in
1. Type in your service password via keypad
(an entering box is displayed)
and press
ok
Ü The confirmation «password CORRECT» or
«password INCORRECT» is displayed
Ü To cancel keying errors press
C
2. Press
F2
3. Start operation
Log out
Log out is not required because operating is automatically inhibited if no key is pressed within a certain time
(programmable timeout 2...10 minutes).
MON 20-SEP-1999 11:23:44
password CORRECT
authorized access level: 2.1
MAIN MENU
FIRE section
EXTINGUISHING section
CONTROL in- /outputs
GEOGRAPHICAL location
DEVICE level
logical address (CSX no.)
password : _
0..9,del:password ok:enter c:end
ok:select F1:function C:end