Operating instructions

e1955
11.1999
39
Siemens Building Technologies
Cerberus Division
Overview operating menus
cont.
To enter ’MAIN MENU’ press
F2
FUNCTION LIST ’area’
switching MANNED/UNMANNED
poll COUNTER ’fire alarms’
reset COUNTER ’fire alarms’
poll COUNTER ’remote alarms’
DE–ISOLATE alarm HORN
ISOLATE alarm HORN
alarm HORN –> START
alarm HORN –> STOP
initiate TEST alarm HORN
DE–ISOLATE REMOTE transm. ’fire’
ISOLATE REMOTE transm. ’fire’
DE–ISOLATE REMOTE transm. ’others’
ISOLATE REMOTE transm. ’others’
DE–ISOLATE REMOTE transm. ’fault’
ISOLATE REMOTE transm. ’fault’
poll EVENT MEMORY
FUNCTION LIST ’section’
same as under
– FIRE detection
– EXTINGUISHING sections
– CONTROL in-/outputs
but includes al
l types of sections
AREAS...
ok
ok
F1
F1
F1
Note
F1 = press
ok = press
FUNCTION LIST ’event memory’
poll all messages
poll all DANGER messages
poll all FAULT messages
poll all DISCONNECTION messages
poll all INFORMATION messages
poll all TEST-ALARM messages
ok
F1
ok
SECTIONS...
select GEOGRAPHICAL location
MAIN MENU
FIRE detection
EXTINGUISHING sections
CONTROL in- /outputs
GEOGRAPHICAL location
DEVICE level
logical address (CSX no.)
access level 3 ’service’
ok:select F1:function C:end
FUNCTION LIST ’installation’
set CLOCK
set DATE
re-configuration C-bus
acknowledge all
reset all