Operating instructions

e1955

11.1999

Siemens Building Technologies

Cerberus Division

Lamp test

What is the «Lamp test» used for?

For testing the correct functioning of all indicators (LEDs), the display, and the alarm buzzer.

All visual and audible devices of the control console are activated for a few seconds.

Initiate lamp test

1. Press

Ü The MAIN MENU is displayed

With

choose the function «DEVICE level»

2. Press

Ü The STATIONS overview is displayed

Press

to select the desired station (terminal)

3. Press

Ü The FUNCTION LIST ’terminal’ is displayed

Press

to select «initiate LAMP TEST» and press

Ü The lamp test is initiated

ok:execute F1:stations C:end

MAIN MENU

FIRE detection

EXTINGUISHING sections

CONTROL in- /outputs

GEOGRAPHICAL location

DEVICE level

logical address (CSX no.)

STATIONS

01 control unit CC1140 ground floor

FUNCTION LIST ’terminal’:

poll INFORMATION ’terminal’

02 terminal CT11 corridor 1st floor

set contrast of DISPLAY

initiate LAMP TEST

set sound level of BUZZER

poll EVENT MEMORY (terminal)

ISOLATE PRINTER (terminal)

ok:select F1:function C:end

ok:funct.unit F2:menu F1:function